New shoes, particularly those with plastic or leather soles, can have frustratingly slippery soles, as can more seasoned shoes that are worn smooth by years of wear and tear. As minor as it might sound, having slippery shoes isn’t only a bother — it’s really a noteworthy reason for harm. Be that as it may, you don’t really need to hurl out a dangerous pair of shoes: with only a couple of basic deceives, it’s normally simple to return some grasp to your shoes for low priced!

1. Scuff the soles on abrasive surface:-

In the event that your slippery shoes are new pair, there’s a decent shot that they’re slippery just on the grounds that their soles are consummately smooth and unworn. Soles by and large get somewhat more hold once they mellow and little niches and scraped areas have been worn into them in light of the fact that these properties permit them to make better contact with the floor. Therefore, wearing your soles out fairly can regularly observably enhance your improve your walk. To do this, take a stab at strolling around on a rough surface like, for example: Concrete (the rougher, the better) Gravel, Rocks, stones, and so on. Finished metal meshes, walkways, and so on. In case you’re not humiliated, you can even take a stab at taking your shoes off and scraping their soles on the ground with your hands.

2. Rub with Sandpaper:-

Aren’t in a circumstance where you can without much of a stretch scrape your shoes on a harsh surface? Stressed over slipping while you’re sitting tight for your soles to wear out? Attempt a grating like sandpaper rather — just remove your shoe and rub the smoothest parts of the sole that touch the floor until they build up a rougher, more finished feel. For this errand, a genuinely coarse sandpaper is ideal, however better sandpapers are superior to nothing. On the off chance that conceivable, use around a 50-coarseness paper. Take note of this may not take a shot at specific soles, particularly those with a natural cardboard-like surface (as is frequently utilized for a few shoes and flats.)

3. If not Sandpaper, Opt for Nail filer:-

In the event that you don’t have sandpaper, a nail file more often than not functions admirably. Utilize it precisely like you utilized your sandpaper — scrape the smooth, level parts of your shoe that interact with the floor to give them some surface. Metal files are regularly the most durable, helpful devices for this undertaking, however even basic emery sheets can work. Likewise with sandpaper, coarser records work best here.

4. Invest in Grip Pads:-

In the event that you’re slipping issues are originating from a more older pair of shoes, the issue may not be that your sole isn’t sufficiently worn, but instead that it is excessively worn. For this situation, you might need to consider adding material to the base of your shoes to give you more grasp. Maybe the most “expert” approach to do this is to apply shoe pads composed particularly for this reason to the soles of your shoes. These textured pads commonly connect to the material of the sole with a glue. Take note of that a few clients whine that this cement can leave shoes with a “sticky” feeling once the cushions fall off. Grip pads are sold at numerous higher-end closet supply stores for genuinely shabby — as a rule close to $10 or so for a solitary set.

5. Puff Paint or Glue gun:-

Drawing patterns on the sole of your shoes provides them a sustainable grip to hold them in place and save you from the slippery. This is a nice way personalize your foot-wears and you can get creative with your design as and how you wish it to be. Both Puff paints and Glue gun will have similar effects. All you have to do is make your patterns and let them dry over night and they are good to use for the next day.

6.Masking tapes:-

One straightforward “final resort” strategy for enhancing the footing of your shoes is to just stick masking tapes in the most smooth areas on their soles. Lay two moves of tape in a “X” design on the most extensive, flattest parts of your soles for greatest impact. The heels and near tip is the area where it will be suggested to stick the masking tape. Know that, as the tape loses its adhesive quality, you may need to make a rerun on the process. And if short of masking tape you can always use band-aids for similar results.